Beluga Glass Cutter
The FS2214 Beluga Glass Cutter cuts windshields faster and
safer than any other method! Hand saws,
sawzalls and axes are slow and messy, and can frighten the accident
victim. When time, safety and expedience
are important, the Beluga Glass Cutter
does a better job in half the time.
FS2214, Beluga Glass
Cutting Kit… Cuts Windshields Like
It takes little effort to quickly remove a windshield, just push the Beluga gently through the
glass… No need to push hard or strain, because the Beluga does all the
work. Cover the victim, attach suction cups to the windshield, poke a
small hole with the provided pick hammer, insert blade, cut out the windshield,
lift off with the provided suction cups.
If you don’t need to remove the entire windshield, just cut out what you
need, or remove it all. It’s simple,
fast and neat. Glass chips are kept to a
minimum inside the vehicle because the upward thrust of the cutter blade pushes
most of the glass debris outside of the vehicle.
FS2214 Beluga Glass Cutting Kit includes: Cutting Tool, Twin suction cups, Pick hammer, Safety glasses, carry bag and instructions
Attach to your favorite cordless drill – driver, (not
included). The Beluga rotates freely on your drill so you can cruise around
corners at lightning speed without re-poking the windshield at every turn. Blade and shoe profiles are tight, limiting
glass dust on the inside of the vehicle.
Works great on laminated hurricane windows too!
The FS2214 Beluga Glass Cutting Kit includes a heavy,
balanced pick hammer. This tool was
chosen for its ability to quickly and easily punch a small hole in the
windshield, one good shot and you have the perfect purchase point for the
Beluga Tool to enter. The hammer has a
large rubber coated “grip handle” so it works well with extrication and
firefighting gloves. If you have ever
tried to pop a hole in a windshield with a Halligan tool, you know it could
bounce back up and hit you in the face.
This will not happen with the pick hammer supplied in the Beluga Glass
The Beluga Glass Cutting Tool uses replaceable hardened
cutting blades that were specially designed to cut laminated glass. The clearance between the movable blade and
the fixed blade is less than 1 -thousandth of an inch. This tight clearance limits the amount of
glass dust that can drop into the vehicle. It also minimizes large glass chips. However, as with any glass cutting method,
glass fragments will drop into the vehicle.
It is very important that you protect the victim from glass chips, as you would with any other tool.
Always wear safety glasses, respiratory protection and
protective gloves when cutting glass, regardless of the method or tools you
use. Always protect the victim before